Quick Details of Flat Valve
Type.:Plastic PVC water type butterfly / Flat valve
Pressure: High pressure
Temperature of Media: High Temperature
Power : Hydraulic
Port size.:100mm DN100 4inch
Applicable medium.: water / weak acid/ weak base
Colour: Black, grey or customized
Packing .: poly bag, inner box , carton or customized
1. The exterior structure is compact and beautiful.
2. The body is light and easy to install.
3, strong corrosion resistance, a wide range of applications.
4, the material is hygienic and non-toxic.
5, wear-resistant, easy to disassemble, easy to maintain.
FEATURES OF PRODUCTS:
The butterfly valve, also known as the flap valve, is a simple regulating valve and can also be used for switching control of low pressure pipeline media. It refers to a valve in which the closing member (valve or disc) is a disc and rotates around the valve shaft to open and close, and is mainly used for cutting and throttling on the pipeline. The butterfly valve opening and closing member is a disc-shaped butterfly plate that rotates around its own axis in the valve body to achieve the purpose of opening and closing or adjusting.
The soft-sealed mid-line wafer butterfly valve, 90° rotary switch is easy, the seal is reliable, and the service life is long. It is widely used in the water supply and drainage of water plants, power plants, steel mills, paper making, chemical industry, food and other systems, as adjustment and cut-off use.
Tips of connecting:
Plastic butterfly valves are connected to the piping system.
Butt welding connection:
the outer diameter of the valve connecting part is equal to the outer diameter of the pipe, and the end face of the valve connecting part is welded to the end face of the pipe;
Socket bonding connection:
the valve connection part is in the form of a socket, and is bonded and connected with the pipe member;
Electrofusion socket connection:
the valve connection part is a socket form in which the inner diameter is laid with electric heating wire, and is electrically connected with the pipe material;
Hot-melt connection of the socket:
the connection part of the valve is in the form of a socket, and the hot-melt socket connection with the pipe;
Bonding connection of the socket:
the connecting part of the valve is in the form of a socket, which is bonded and inserted with the pipe;
The rubber sealing ring connection of the socket:
the connecting part of the valve is in the form of a socket with a rubber sealing ring embedded therein, and the socket is connected with the pipe;
the valve connection part is in the form of a flange, which is connected with the flange on the pipe;
the valve connection is in the form of a thread and is connected to the thread on the pipe or pipe;
The valve connection is in the form of a joint and is connected to the pipe or pipe.
A valve can have different connections at the same time.